PAVAS Set TSD Stage Menu

This menus is used to set the TSD stage parameters for up to 64 stages. It consists of four sub menus.

The first sub menu is the stage selection. The stage number can be set by moving the underline cursor and using the up down button. PAVAS recalls the last stage number set, so scrolling to a new stage is simplified. Press Select to edit the stage.

The next sub menu shows the TSD distance and stage number. Use the cursor to set the TSD stage distance with a resolution of 0.01 Kms. PAVAS limits the stage distance to 500 Kms. Press Select to save the value and move to the next sub menu.

The third sub menu is the TSD average speed. The cursor is used to manipulate the edited value. The speed resolution is 0.1 kph. Press Select to save the TSD average speed value and move to the next sub menu.

The fourth sub menu is the TSD Minimum speed. When the vehicle is less than this speed, a continuous low frequency tone of 300 Hz sounds. The minimum speed is set for each stage. Press Select to save the value and move to the summary display.

The summary display shows the TSD Distance and the time required. Press Select to return to the TSD Menu.

Note that PAVAS recalls the last stage set, so setting multiple stages is simple.